UIC54 UIC860 steel rail
- Standard: BS, JIS, BS, EN 13674-1
- Grade: 900A/1100
- Rail Heigth: 159mm
- Bottom Width: 140mm
- Web Thickness: 16mm
- Head Width: 70mm
- Length: 12-30m
- Model Number: UIC54/54E1
- Application: Railway Rail
- Weight: 54.77 kg/m
- Product name: High Quality UIC54/54E1 Railway Rail,
- Key words: Railway Track
- Material: 900A/1100
- Certificate: 3.1 MTC/ISO9001:2008
- Warranty: 12 months
- Exportable international standard flat bottom rail
- Supply related rail fasteners
UIC860-O UIC54 rail is widely used for state railway line of English countries, we can produce it by order, the MOQ should more than 400 tons, hardness can be R260/320HBW/350HT, length 12 to 30 meters, our products can accept any third-party inspection.
Length: 12 to 25 meters;
Unit weight: 54.77 kg/m;
Production standard: UIC860;
Delivery inspection standard: EN13674 for qualifying tests and acceptance tests;
Hardness: R260, R320.
Please notice that the MOQ should more than 500 tons.
− qualification test and
Standard EN 13674 – 1:2003 consists of two main parts:
− acceptance tests
Qualification tests are some other tests that were previously carried out, as for example, fracture toughness. Acceptance tests characterize the properties of the prescribed tests, which ensure production of high quality rails, and testing requirements of railway administration.
Quality of rails is based on measured values of hardness, by which they introduced new labels for steel rails.
Qualification testing must be conducted at least one in five years and the major
changes in technology, production rails. Additional testing residual stresses are carried
out on all types of steel rails every two years maximum, provided that the longitudinal
strain rate in the rails can amount to up to 250 MPa.
The prescribed qualifying examination is the following:
− fracture toughness
− fatigue crack growth rate
− fatigue testing
− residual stress in rail foot
− variation of centre line
− tensile strength and elongation
− other qualification requirements
Within acceptance testing is carried out a series of laboratory tests such as:
− chemical composition (the maximum content of the following elements: H, O, Al, V, N and oligo elements)
− microstructure (increasing x 500)
− degree of decarburizing charred layer (allowed up to 0.25 mm)
− purity of steel (especially the presence of oxide)
− macrostructure (Baumann test)
− tensile strength
Other acceptance testing rails are:
− dimension tolerances
− criteria (control template)
− inspection requirements / tolerances for to internal quality and surface quality
Internal state is examined ultrasound in a continuous process control, and includes at least 70% of the head and at least 60% web.
– Standard of UIC 860 V: 1996 – prescribed four types pearlite steel rails in the range of tensile strength from 700 to 1300 MPa.
– Standard EN 13674 – 2003, provides seven types pearlite steel hardness in the range 200 to 390 HBV, types steel in accordance with EN 13674, based on the values of hardness (R 200, R 220, R 260, R 260 Mn, 320 Cr, 350 HT, 350 LHT).
Fish Bolt: 22x135, 24x135, 24x145
High-strength Fish Bolt: 22×135, 24×135, 24×145
Insulated Bolt: 22×160, 24×160, 24×170
T type bolt: M24x110
Flat Washer: 6×25×50
Spring Washer: 20×8, 24×8, 26×8
Double Spring Washer: 26×8
Screw Spike: M22x185, M24x195
Square head screw spike: 22x145, 22x155, 22x165
Hexagon screw spike: 22x145, 22x155, 22x165, 22x185, 22x195
Dog Spike: 16x16×165mm, 8x8x80mm, 10x10x100mm
Gauge Apron: 10#, 13#, 14#, 20#
Antiseptic gauge apron: 10#
Steel base plate/ base plate: For any type of rail
Rail anchor: For any type of rail
Rubber tie plate: For any type of rail
Elastic rail clip: A, B Type
Elastic rail clip: SKL serious Type
Antiseptic elastic rail clip: G Type, W Type, B Type
Nylon apron block: V type, 0-4#, 2-6#
Insulated Rail Gauge Rod: ¢32, ¢36
Rail Gauge Rod: ¢32, ¢36
Fishplate: 43kg, 50kg, 60kg, 75kg, BS60, BS75R, BS80A, BS90A and so on.
Insulated fishplate: 43, 50, 60, 75, UIC60, UIC54 etc.