DIN536 A150 / A120 / A100 / A75 / A65 / A55 / A45 crane matumizi ya reli

DIN536 A150 / A120 / A100 / A75 / A65 / A55 / A45 crane reli hutumiwa kwa kukimbia kwa crane, Overhead Crane Moving, bandari na wharf crane kusonga reli, pia itumike kwa transfoma inayotembea au gati ground crane inayoendesha. Engine 900, Ugumu ni zaidi ya HB260, min 880 N/mm2, urefu ni 12 Mita.

This standard crane rail has very wide bottom, most traditional developed countries like to use this crane rail, but the cost is higher than Chinese standard QU crane rail (or named GOST KP crane rail), please refer the specification as below:

DIN 536 reli ya crane
Aina Kipenyo (mm) Uzito wa kitengo (kilo/m) Vifaa Urefu (m)
H.W (mm) H (mm) B.W (mm) W.T (mm)
A45 45 55 125 24 22.2 900A 12
A55 55 65 150 31 31.8 900A 12
A65 65 75 175 38 43.1 900A 12
A75 75 85 200 45 56.2 900A 12
A100 100 95 200 60 74.3 900A 12
A120 120 105 220 72 100 900A 12
A150 150 150 220 80 150.3 900A 12

For these crane rails, some time we have some stock, if you need them, should confirm the type and quantity in advance. If we do not have stock, and the quantity is enough, we can deliver it within 40 Siku.

Q&A:

  1. How to install the crane rail?
    Normally should use weldable rail clamp to weld on steel structure (plate), bottom should lay rubber pad to reduce the impact force.
  2. How to choose single weldable rail clamp or double weldable rail clamp?
    This should follow the design drawing, normally more than A75 should use double weldable rail clamp, less than it should use single weldable rail clamp.
  3. How much rail clamp should be installed?
    This also need follow the designing, if the crane is less than 275 Tani, the installation distance can be 600mm; If the weight of crane more than 275 Tani, the distance should be 500mm.
  4. How to choose the rubber pad?
    The width of rubber pad should same as the width of rail bottom, thickness should be 8mm, length should same as the length of rail 12000mm. The surface has groove, inside has iron sheet, the groove should be installed to upper.

Please refer the installation fasteners:

Pendekeza reli zetu za kiwango cha kimataifa za chini:

MATUMIZI YA RELI

AINA YA RELI

KIWANGO CHA

Reli kwa Reli 43 reli ya kg /m, 50 reli ya kg /m,

60 reli ya kg /m, 75reli ya kg /m, 60N reli, 75N reli

TB/T2344-2012, TB/T3276-2011
Reli ya P50/Reli ya R50, Reli ya P65/Reli ya R65 GOST-R51685
Reli ya S49, Reli ya UIC54, Reli ya UIC60 UIC860
Reli ya JIS50N, Reli ya JIS60 JIS E1101
Reli ya AS50, Reli ya AS60, Reli ya AS68 AS1085, BHP RT STD
90Reli ya RA, 100Reli ya RE, 115Reli ya RE, 132Reli ya RE, 136Reli ya RE AREMA
Reli ya TR45, Reli ya TR50,

Reli ya TR57, Reli ya TR68

ASTM
Reli ya BS75A, Reli ya BS90A, Reli ya BS100A KIWANGO CHA BS11
49Reli ya E1, 50Reli ya E2, 54Reli ya E1,

60Reli ya E1, 60Reli ya E2

EN 13674-1
Badilisha Reli 50Reli ya AT1, 60Reli ya AT1,

60Reli ya AT2, 60Reli ya TY1

TB/T3109-2013
Reli ya Crane A45, A55, A65, A75, A100, A120, A150 DIN536
Reli ya QU70/Reli ya KP70, Reli ya QU80/Reli ya KP80, Reli ya QU100/Reli ya KP100,

Reli ya QU120/Reli ya KP100, Reli ya CR175

YB / T5055-2014
ASTM A759-2000
Reli ya Grooved 59Reli ya R2, 60Reli ya R2 EN 14811:2006

 


Huduma ya Mtandaoni
Gumzo la Moja kwa Moja