강철 레일의 품질에 대한 새로운 요구 사항
Abstract
Rails are an important part of the railway infrastructure. 철도의 품질은 철도 교통의 기능에 직접적인 영향을 미칩니다. 열차 속도 증가, high frequency of traffic and axle load wagons and locomotives is directly related to the quality of rails. The characteristic quality tracks are prescribed standards of the International Union Railway (published UIC and EN 13674).
In order to increase the competitiveness of rail transport compared to other forms of transport and establishment of interoperable railway system of the European Union, is obligate to establish system management quality in according to ISO 9001. Also new standard EN 13674 establish other types steels of rails (seven types pearlite steels) and introduces a new philosophy in the micro and macro composition of steel for rails.
소개
The railway infrastructure is a tracks with all the appropriate facilities plants and other devices, which are in function at the railway traffic.
Rails as an important part of the railway infrastructure have exactly level of quality. In Europe, the quality of rails is prescribed by international standards, the European Union of Railways UIC 860 and EN13674.
In other vital parts of railway infrastructure in order to: increase the speed of trains, increasing the axles loads of trains and locomotives traction and increasing the density of traffic and increase resistance to harmful influences of the environment (environmental aspects), required and improve the quality of rails.
The European Union standards for railways (증권 시세 표시기) have agreed national standards of different countries.
The quality of tracks, measures and tolerances are prescribed standards SRPS.C.K1.020 and SRPS.C.K1.021.
These standards clarify in detail the most important components of quality tracks, production of steel for rails, and to control the final delivery of new rails.
Depending on load rails in service are set levels of quality tracks, with the aspect tensile strength and ductile properties. Depending on the degree exploitation load rails, rails are divided into two main groups, namely:
– rail and normal quality
– wear resistant rails (rails with high resistance to abrasion).
Demands for quality rails, metal-in during production steel rails, emphasis given to the following adjustment in the production of rails:
– Increased the mass of the rail due to the meter 45 받는 사람 77 kg / m. Now the most used rails with a mass 60 (Fig. 1) the prescribed weight of 60,34 kg / m, represented by former rail profile 49 kg / m prescribed weight 49,43 kg / m (Fig. 2).
– Increase the value of tensile strength from 700 받는 사람 1300 증권 시세 표시기.
– Increasing the purity of steel especially sulfur and phosphorus from the previous maximum of 0,050 받는 사람 0,030%.
Production of long rails up to 120 m in length (decreasing the number of welded joints and dilatation spaces). [1], [4]
Macrostructure i. e. the consistency of the material is checked by Baumann test.
For Baumann test can be seen the level of expressed macro segregation, which is in direct correlation with low soluble micro constituents layout (Fig 3).
Fig. 3 Strong segregation block at the intersection of rails
Prescribed properties for steel of rails
Requirements of UIC 860 V
For a selection of different types of rails, the corresponding chemical composition and mechanical property requirements are presented in (테이블 1) according to standard UlC 860 – 1.
From the Table it is obvious that, in the case of wear – resistant rails, increased carbon (C) and manganese (미네소타) content is responsible for the improved mechanical properties. The increase in wear resistance is based on a theory of the mutual influence of certain elements. Carbon influences the mechanical properties through the volume fraction of cementite and the content of pearlite. Manganese influences the temperature decrease of the eutectoid reaction and the fineness of pearlite lamellae, 말하자면, the reduction in the interlamellar distance. As an illustration of the influence of alloying elements, 탄소와 같은, manganese and silicon, on wear speed for a pearlite structure.
where:
W – represents the speed of wear expressed as volume loss per unit of path over which sliding occurs, C, 미네소타, 시 – represent the percentage contents of carbon, manganese and silicon respectively.
For all rail types, the appropriate values of mechanical properties are also laid down and controlled by the Standard (테이블 1).
In pearlitic steels, the structure of which is depicted in (Fig. 4). The mechanical properties are largely governed by the distance between the cementite (Fe3C) lamellae, their thickness and by the grain size. The influence of the interlamellar spacing on yield point, tensile strength and reduction of area is demonstrated by the structures shown in (Fig. 5). These examples display microstructures of the same steel subjected to different cooling rates. The same effect can be achieved by controlling the diffusion rate via the alloying contents. [1]
The new European standard EN 13674, which deals with issues of quality rail, takes into account the increasing demands for safety and economy of railway traffic.
European standard EN 13674 includes symmetrical rails with wide rate of mass ≥46 kg/m.
This standard was developed by the European Committee for Standardization CEN (European Committee for Standardization) of the National Committee of the 19 countries. This standard has built a modern approach to the issue of quality tracks with the recommendation that manufacturers should be required tracks have introduced quality management system in accordance with the requirements of ISO 9001 표준.
표준 EN 13674 – 1:2003 두 가지 주요 부분으로 구성됩니다.:
- 자격 시험 및
- 합격 시험
자격 시험은 이전에 수행 된 다른 테스트입니다., 예를 들어, 파괴 인성. 수락 테스트는 규정 된 테스트의 특성을 특성화합니다., 고품질 가로장의 생산을 지키는, 및 철도 행정의 시험 필요조건 (테이블 2) 그리고 (테이블 3).
레일의 품질은 경도의 측정 값을 기반으로합니다., 그들은 강철 레일에 대한 새로운 라벨을 도입했습니다..
적격 시험
Qualification testing must be conducted at least one in five years and the major changes in technology, 생산 레일. Additional testing residual stresses are carried out on all types of steel rails every two years maximum, provided that the longitudinal strain rate in the rails can amount to up to 250 증권 시세 표시기.
규정된 자격 시험은 다음과 같습니다.:
- 파괴 인성
- 피로균열 성장률
- 피로 테스트
- 레일 풋의 잔류 응력
- 중심선의 변화
- 인장강도와 연신율
- 분리
- 기타 자격 요건
수락 테스트
수락 테스트 내에서 다음과 같은 일련의 실험실 테스트가 수행됩니다.:
- 화학 성분 (다음 요소의 최대 내용: H, O, 알,
V, N 및 올리고 요소)
- 미세 구조 (x 증가 500)
- 탈탄 차레드 층의 정도 (최대 허용 0.25 밀리미터)
- 강철의 순수성 (특히 산화물의 존재)
- 거시 구조 (바우만 테스트)
- 경도
- 인장강도
다른 수락 테스트 레일은 다음과 같습니다.:
- 치수 공차
- 기준 (제어 템플릿)
- 검사 요구 사항 / 내부 품질 및 표면 품질에 대한 허용 오차
내부 상태는 연속 공정 제어에서 초음파를 검사합니다., 그리고
includes at least 70% 머리와 적어도 60% 웹.
테이블 2. Chemical composition/mechanical properties (according to the standards EN
13674-1:2003)
Conclusions
Based on insight into the current national international documents that regulate
the quality of tracks and access to the existing situation in the Serbian Railways can
conclude the following:
– In order to increase functionality, and safety of railway traffic, the rails as part of the
railway infrastructure, are paid special attention to the aspect of continuous
improvement of their quality.
– UIC의 표준 860 V: 1996 – prescribed four types pearlite steel rails in the range
of tensile strength from 700 받는 사람 1300 증권 시세 표시기.
– 표준 EN 13674 – 2003, 범위에 있는 일곱 유형 펄라이트 강철 경도를 제공합니다
200 받는 사람 390 증권 시세 표시기, EN에 따라 유형 강철 13674, based on the values of
경도 (R 200, R 220, R 260, R 260 미네소타, 320 크롬, 350 증권 시세 표시기, 350 증권 시세 표시기).
– According to the requirements of new European standards for rails, 레일
manufacturer is obliged to harmonize its procedures with the procedural
requirements of the standard EN ISO 9001: 2000.
– According to standard EN 13674 is introduce qualifying tests due to check of
제조 업체
– Acceptance test appear new requirements for the quality of tracks such as:
- 파괴 인성
- measurement of crack propagation
- Fracture Mechanics
- continuous ultrasound control rails (70% heads and 60% 웹)
- Holders of higher tensile strength and hardness of the rails are chemical
elements: 탄소, manganese and chromium, and also prescribed the
maximum value of residual elements in steel, which greatly reduce ductile
properties.
