GHDG-800 stała szyna doczołowa lampy błyskowej & zgrzewarka rozjazdowa wyposażona jest w wysokie zasilanie DC. Przeznaczony jest do stosowania w instalacjach stacjonarnych do spawania krótkich szyn 500 metrów lub więcej, a także rozjazdów na tory (takie jak żaby ze stali wysokomanganowej) i duże części stopowe. Ta wszechstronna spawarka może spawać każdy rodzaj szyn i żab, zapewnienie dokładnego osiowania i zapobieganie poślizgowi szyn podczas procesu kucia wywrotów. It also provides stable and uniform power supply performance. The GHDG-800 can be configured for continuous welding, pulsation welding, and preheating welding processes.
Część A: Basic Information
The machine consists of various components including a water-cooling system, układ hydrauliczny, spawalniczy obwód główny, elektryczny system sterowania, głowica spawalnicza, software system, and other parts.
Część B: Scope of Application
This welding machine is primarily used for flash butt welding of large profiles, especially for welding turnouts and rails.
Część C: How It Works
The welding machine features four independent clamping devices that accurately hold irregularly shaped workpieces in a horizontal position. It also has a centering function to adjust the relative position of the workpieces for precise butt welding. Podczas spawania, a strong DC current is supplied through the clamping electrode to reduce welding resistance. Once the welding surface reaches the required temperature, upsetting is performed to complete the welding process. The upsetting mechanism ensures even distribution of forging pressure for precise welding.
Część D: Welding Range
The GHDG-800 is capable of welding turnouts and rails that comply with national standards in China, the European Union, Rosja, Stany Zjednoczone, and other countries. This includes various combinations such as rails and rails, and rails and turnout frogs with austenitic or high-manganese steel spacers. The machine can weld cross sections up to 16,000 mm2 with a tensile strength of 800-1300 N/mm2. The welding efficiency can reach a maximum of 20 joints per hour.
Część E: Parametry techniczne
E.1 Wymagania dotyczące zasilania
– Power Supply Voltage: 400±15V
– Number of Power Supply Phases: 3
– Power Supply Frequency: 50Hz
E.2 Transformator
– Transformer Capacity: 630 KVA
– Maximum Voltage Drop: 10%
E.3 Main Electrical Parameters of Welding Machine
– Transformer Rated Primary Voltage: 400V
– Phases of Primary Voltage: 3
– Frequency of Primary Voltage: 50Hz
– Auxiliary Voltage: 230V
– Phases of Auxiliary Voltage: 2
– Frequency of Auxiliary Voltage: 50Hz
– Transformer Power Rating: 580 Kva
– Współczynnik czasu uruchamiania (ED): 50%
– Secondary Idling DC Voltage: 7.7V
– Etapy transformacji transformatora: 1
E.4 Technical Parameters of Mechanical Parts
– Maximum Upset Force: 1000 Kn
– Clamping Force: 2000 Kn
– Electrode Pressure: 1000 Kn
– Clamping Stroke: 120 Mm
– Upset Stroke: 50 Mm
E.5 Technical Parameters of Hydraulic System
– High Pressure (Pump Pressure): 140 bar
– Low Pressure: 40 bar
– System Pressure: 130 bar
– Accumulator Charge Pressure: 40 bar
– Volume Flow with Pump Pressure: 190 L/min
– Fuel Tank Capacity: 400 L
E.6 Technical Parameters of Water-Cooling System
– Water Quality Requirements: Clean, Filtrowane, Bez wapnia, obojętny do niskoalkalicznego
– Płynąć: 150 L/min
– Cooling Water Pressure: 4-6 bar
– Entry Water Temperature: Max 25 °C
– Wzrost temperatury: 7 °C
– Cooling Power: 63000 kcal/h
– Filtration Accuracy: 100 μm
– Dh – wartość, Total Hardness: 9-15 °
– Dh – wartość, Carbonate Hardness: Max 9 °
– ph – wartość: 7-8
– Solid Fraction: Max 50 mg/l
– Sum of Salts (Sulfates/Nitrates/Chlorides): Max 70 mg/l
Part F: Main Features
– Utilizes high power DC welding for low welding resistance
– Equipped with an independent three-stage cooling system for easy maintenance, monitoring, and high cooling efficiency while preventing cross-contamination
– Features closed-loop automatic alignment for high alignment accuracy
– Includes fault self-diagnosis capabilities
– Incorporates temperature detection and thermal compensation
– Offers multiple welding processes to adjust according to specific requirements