جی ایچ ڈی جی -800 نے بڑی فلیش بٹ ریل کو ٹھیک کیا & ٹرن آؤٹ ویلڈنگ مشین

جی ایچ ڈی جی -800 نے بڑی فلیش بٹ ریل کو ٹھیک کیا & ہائی ڈی سی بجلی کی فراہمی کے ساتھ ٹرن آؤٹ ویلڈنگ مشین, فکسڈ پلانٹ میں مختصر ریلوں کو ریل میں ویلڈ کرنے کے لئے استعمال کیا جاتا ہے 500 میٹر اور زیادہ, یا ٹرن آؤٹ کو ریل میں ویل کرنے کے لئے (جیسے ہائی مینگنیز سٹیل مینڈک), یا بڑے مرکب حصوں کو ویلڈ کریں.
اس قسم کی ویلڈنگ مشین کسی بھی قسم کی ریل اور مینڈک کو ویلڈ کر سکتی ہے, ریل یا مینڈکوں کو درست طریقے سے ترتیب دیں, اپ سیٹ فورجنگ کے دوران ریل کو پھسلنے سے مؤثر طریقے سے روکیں, پریشان ہونے کے بعد فوری طور پر ٹرم کریں, اور بجلی کی فراہمی کی کارکردگی مستحکم اور یکساں ہے.
یہ ویلڈنگ مشین مسلسل ویلڈنگ کے عمل کے کسی بھی امتزاج کا احساس کر سکتی ہے, دھڑکن ویلڈنگ کا عمل اور پری ہیٹنگ ویلڈنگ کا عمل.

Part A: The basic information
Name of the machine: Updated Fixed large Flash Butt Rail & Turnout Welding Machine
Model of the machine：DGHG-800
Machine composition: It is mainly composed of water-cooling system, hydraulic system, welding main circuit, electrical control system, welding head, software system and other parts.

Part B: Scope of application
This welding machine is suitable for the processing of flash butt welding of large profiles, especially for the welding of turnouts and rails.

Part C: How it works
The welding machine has four independent clamping devices, which can accurately clamp the welded workpiece with irregular cross-section and keep it horizontal. The welding machine has a centering function, which can adjust the relative position of the workpiece to be welded to complete high-precision butt welding.

During welding, a strong DC current is supplied to the workpiece to be welded through the clamping electrode, which effectively reduces the welding resistance. When the welding surface of the workpiece to be welded reaches a sufficient temperature, upsetting is performed to complete the welding. The upsetting mechanism can distribute the forging pressure on the welding surface to ensure the welding accuracy.

Part D: Welding range
Welding of turnouts and rails conforming to the national standards of China, the standard of European Union, Russian standard, the standard of United States , وغیرہ., including the welding combination of rails and rails, rails and turnout frogs (with austenitic spacers, high-manganese steel spacers).
Weldable cross section: up to 16000 مم2
Tensile Strength: 800 – 1300 این/ایم ایم 2
Welding Efficiency: میکس 20 joints/hour

Part E: تکنیکی پیرامیٹرز

E.1 Power Requirements
Power Supply voltage: 400±15V
Number of phases of power supply: 3
Frequency of power supply: 50 Hz

E.2 Transformer
Transformer capacity: 630 kVA
Maximum voltage drop: 10%

E.3 Main electrical parameters of welding machine
Transformer rated primary voltage: 400 V
Phases of primary voltage: 3
Frequency of primary voltage: 50 Hz
Auxiliary voltage: 230 V
Number of phases of auxiliary voltage: 2
Frequency of auxiliary voltage: 50 Hz
Transformer power rating: 580 kVA
Startup Duration Factor (ED): 50%
Secondary idling DC voltage: 7.7 V
Transformer Transforming Stages: 1

E.4 Technical parameters of mechanical parts
Maximum upset force : میکس. 1000 kN
Clamping force: میکس. 2000 kN
Electrode pressure: میکس. 1000 kN
Clamping stroke: میکس. 120 ملی میٹر
Upset stroke: میکس. 50 ملی میٹر

E.5 Technical parameters of hydraulic system
High pressure (pump pressure): 140 bar
Low pressure: 40 bar System pressure: 130 bar
Accumulator charge pressure: 40 bar
Volume flow with pump pressure : 190 L/min
Fuel tank capacity: 400 L

E.6 Technical parameters of water-cooling system
Water quality requirements: clean, filtered, calcium-free, neutral to low alkaline.
Flow: 150 L/min
Cooling water pressure: 4 – 6 bar
Entry water temperature: میکس 25 °C
Temperature Rise: 7 °C
Cooling power: 63000 kcal/h
Filtration accuracy: 100 μm
dH – value, total hardness: 9 – 15 °
dH – value, carbonate hardness: میکس. 9 °
pH – value: 7 – 8
Solid fraction: میکس. 50 mg/L
Sum of salts (sulfates/nitrates/chlorides): میکس. 70 mg/L

Part F Main features

*Low welding resistance for high power DC welding power is used
*Independent three-stage cooling system is used, which resulting in easy overhaul and monitor, preventing cross-contamination, and have high cooling efficiency
*High alignment accuracy for closed-loop automatic alignment is used
*With fault self-diagnosis
*With temperature detection and thermal compensation
*The multi-mechanism welding process can be used to adjust the welding process to a greater extent according to the process requirements.

Part G Structure view