GOST 1R65 balık tabağı, GOST'a göre tasarlanmış ve belirlenmiş bir balık tabağı türüdür (Rusya Devlet Standardı) 1R65 standardı. Balık plakaları, iki demiryolu rayını demiryolu ekleminde birleştirmek için kullanılan metal çubuklardır. GOST 1R65 balık plakası, yüksekliği yüksek olan Rus standart ray profilleriyle kullanılmak üzere özel olarak tasarlanmıştır. 152 mm ve taban genişliği 160 Mm.
GOST 1R65 balık plakasının ayrıntılı özellikleri aşağıdaki gibidir::
Malzeme: Çelik, genellikle sınıf 55#
Uzunluk: 1000 Mm
Genişlik: 45.5 Mm
Yükseklik: 130 Mm
Hole diameter: 30 Mm
Ağırlık: Approximately 29.5 Kg
Standard compliance: GOST 1R65-75
These fishplates are designed to be used with rails of the same standard and are manufactured with precise tolerances to ensure that they fit the rails correctly and provide a secure joint. They are commonly used in railroad construction and maintenance projects in Russia and other countries that use the Russian standard rail profiles.
The GOST 1R65 fishplate is a type of rail joint commonly used in Russia and other countries in the former Soviet Union that use the Russian rail standard. It may also be used in other countries that use Russian rail profiles or have adopted the GOST standard for rail joints. Bu yüzden, it is primarily used in countries that have a history of using Russian rail standards or have adopted them for their rail infrastructure.
The GOST 1R65 fishplate is used for joining two rails together in a railway track. Here are the basic steps to use it:
- Make sure that the two rail ends to be joined are clean and free of any debris or rust.
- Place the two rails end to end, ensuring that they are properly aligned.
- Slide the GOST 1R65 fishplate over the two rail ends so that it is centered and covers the joint between the two rails.
- Insert the fish bolts (also known as fishplate bolts) through the bolt holes on the fishplate and the rail ends. Make sure that the bolts are tightened evenly and not excessively, which can cause damage to the fishplate or the rails.
- Check the joint for any gaps or misalignment between the rails. Gerektiğinde, adjust the bolt tightness to ensure a tight and secure joint.
- Once the joint is properly installed and tightened, it should be inspected regularly to ensure that it is still in good condition and does not require any maintenance or repair.
Pad 1R – 65 is designed to be used as a transition pad for rails of a similar type, R-65 tipi ray bağlantılarının çivili ve yaylı ray tutturulması için tasarlanmıştır.
For joining the R-65 and R-75 rails, altı delikli astarlar 1R-65 1000 mm uzunluğunda, ve dört delikli astarlar 2R-65 800 mm uzunluğunda kullanılır.
R-65 rails are jointed with each other using a 1R-65 lining or 2R-65 lining, which is attached to the inside and outside of the rail using M24x160 butt bolts.
Uluslararası standart düz tabanlı rayları aşağıdaki gibi tedarik edebiliriz, ihtiyacınız varsa, lütfen bize sormaktan çekinmeyin: