10kq yüngül dəmir rels

10kg light iron rail is produced by the roller of 12 kq/m dəmir yolu, the dimesion of height all be same as 12kg rail, but the width will be reduced to the weight of 10 kq/m, the actual weight has 9.8 kq/m, uzunluğu 6 m, material is Q235B.

10kg light iron rail refers to a type of railway rail that has a weight of 10 kilograms per meter. This is an extremely lightweight rail that is typically used in very specific applications, such as temporary track installations, narrow-gauge railways, or light-duty industrial tracks where extremely low axle loads and minimal traffic volumes are expected.

The term “yüngül dəmir rels” suggests that the rail is made primarily of iron rather than steel, which is the more common material used for modern railway rails. However, it is possible that the term “iron rail” is being used here colloquially to describe a steel rail with a very low weight specification.

The specifications of 10kg light iron rail can vary depending on the manufacturer and the specific application, but typically it has a much smaller profile compared to standard railway rails. The rail height (also known as the rail head) is usually around 60-70 millimeters, the base width is approximately 50-60 millimeters, and the web thickness is around 2-4 millimeters.

Due to its extremely lightweight design, the 10kg light iron rail has a very low load-carrying capacity and is not suitable for most railway applications. It may also be more prone to deformation and wear over time due to its lower strength and hardness compared to heavier rails.

Proper installation, maintenance, and inspection of the 10kg light iron rail are essential to ensure its continued safe and efficient operation in the intended application. However, it is important to note that the use of such lightweight rails in most railway systems is generally not recommended due to their limited performance characteristics and potential safety risks.

Biz anbarda hər cür Çin standartı polad relsləri təmin edə bilərik, digər xüsusi beynəlxalq standart tipli relsləri təmin edə bilər, daha çox miqdarda xüsusi tipli polad relslər istehsal etmək üçün qəlib də edə bilər. 12 kq/m mədən istifadəsi üçün yüngül polad relslər.

İstədiyiniz kimi dəmir yolu xəttini dizayn edə bilərik, və kiçik tipli mədən dəmir yolu xətti və kran hərəkət xətti qura bilər, həmçinin bütün işlək bağlayıcıları təmin edə bilər.

Aşağıdakı kimi yüngül relslərin normal materialı: