Noi nu suntem doar de aprovizionare macara feroviar și elemente de fixare, dar, de asemenea, furnizarea serviciului de proiectare și instalare. Dacă aveți această cerință, vă rugăm să scrieți un e-mail pentru a ne spune cerința dumneavoastră detaliată: [email protected].
Please refer the example that we talked an Italian project that work in Vietnam:
This is a 70.6m x 4 crane rail line, Italian customer will install the crane in Vietnam, they found us to do the crane rail project, we can save a lot of charge the themselves.
At beginning they want to us S49 rail, because the quantity is little, we suggest they use Chinese standard 50kg/m rail instead of it, the detailed communication as below:
Un. About the technology questions:
We confirm with our engineer about the detailed specification, we have some opinions as below:
- As the standard dimension of 50kg rail clamp, we had to update the width of steel plate to 430mm.
- We consider fixing the clamp to buried bolt directly, the design will be simple, and the fixing strength will be higher.
- We consider use same steel plate and rail clamp, the fix distance all be 0.6m, the construction will be easier.
- The weight of rail clamp will be heavier, so the cost will be higher.
- The weight of buffer plate also be heavier, so the cost is raised too. Because the design is different than your drawing, please confirm the stop area of your crane, let’s install the buffer rubber to same stop area.
B. About the installation questions:
- The installation cost includes round air tickets and grains. The owner also needs arrange our board and lodging, pick up and return us to airport. We’ll have three persons.
- We consider to finishing the work within 7-10 Zile, when the owner makes the pre-buried bolt well, we will go to install it, they also need help us to carry the heavy goods, like steel rail etc.
- Because our design all be same fastener, same distance, the concrete construction will be easy.
C. Regarding the quotation of materials:
Item No. |
Descriere | Unitate |
Cantitate. |
1 |
50 kg/m șină de oțel, standard GB2585-2007, Material U71Mn, Lungime 12 Metri |
m | 282.40 |
2 |
50kg rail joint bar with fishbolts, 6 Găuri |
Seturi |
20 |
3 |
Placă de oțel, 12x430x160mm, distance 0.6m |
Buc |
472 |
4 |
Tampon de cauciuc, 7x132x160mm |
Buc |
472 |
5 |
Buried bolt M24x175mm with nut & Șaibă de primăvară |
Seturi |
944 |
6 |
Rail clamp 6a-5 with irregular gasket & press tongue |
Seturi |
944 |
7 |
Buffer plate |
Seturi |
8 |
- Expiry Date: 10 Zile, the price will be changed by material and exchange rate.
- Timpul de livrare: În 25 Zile.
- Payment Term: T /T 30% în avans, balanța față de copia B/L la vedere.
- Installation cost xxx USD, 3 persons. Includes visa, round air tickets, subsidy, not includes concrete pre-buried bolt work.
- Accord to the attached material, design drawing and photos.