EN13674-4 45E1 steel rail is a type of European standard rail made from steel of grade 900A with a minimum tensile strength of 900 N/mm2. The rail has a head width of 66.67 mm, a height of 142.88 mm and a bottom width of 127 mm. The designation 45E1 refers to the rail’s weight in kilograms per meter. It is commonly used for railways line.
EN13674-4 45E1 steel rail can be used in areas with harsh weather conditions, such as extreme cold or heat, and in areas with high levels of corrosion and wear.
The production process of EN13674-4 45E1 steel rail typically includes the following steps:
1. Raw materials: Start with high-quality steel billets that meet the requirements of EN13674-4 standard.
2. Heating: Heat the steel billets in a reheat furnace to a temperature suitable for rolling and shaping.
3. Rolling: Hot-roll the billets into the desired shape, using a rolling mill. This process involves passing the heated billets through a series of rollers to form the rail shape.
4. Cooling: Allow the rail to cool slowly to room temperature in a cooling bed so that it can develop its strength and hardness.
5. Kəsmə: Cut the rail to the required length using a saw or guillotine.
6. End finishing: Finish the ends of the rail by cutting them at a specific angle to allow them to fit together seamlessly with other rails.
7. Quality control: Inspect the rails to ensure compliance with EN13674-4 standards, including dimensional accuracy, straightness, surface quality, and mechanical properties.
8. Packaging and shipping: Package the rails according to customer requirements and ship them to the customer.
The production process may vary slightly depending on the specific manufacturing process and the requirements of the customer.
The 45E1 rail is a type of steel rail commonly used for heavy-duty industrial applications, such as railway tracks, tramways, and subway lines. It is used in many countries around the world, including but not limited to China, the United States, Europe, and South America. The use of this type of rail is dependent on the specific needs and requirements of the railway system or project where it will be applied.
Biz hər cür Çin standartlı polad relsləri və digər beynəlxalq standart tipli relsləri təmin edə bilərik, kəmiyyət kifayət edərsə, xüsusi növ polad rels istehsal etmək üçün rulon hazırlaya bilər. İstədiyiniz kimi dəmir yolu xəttini də dizayn edə bilərik, və mədən dəmir yolu xətti və kran hərəkət xətti tikmək, və işlək bərkidiciləri təmin edin.
Biz Avstraliyaya polad rels və bağlayıcılar satmışdıq, İngiltərə, Sinqapur, Malayziya, İndoneziya, Keniya, Azərbaycan, Albaniya, Pakistan, Türkiyə, Koreya, Rumıniya, Səudiyyə Ərəbistanı, Vyetnam, Zimbabve, Ghana and other countries.
Biz uzun müddətdir ki, xaricdən gələn müştərilərlə işləyirik, istənilən problemi həll etmək üçün zəngin təcrübəyə malik olmaq, dil və texnologiyada çətin olanı həll edin, və istədiyiniz məhsulların istədiyiniz kimi həyata keçirilməsini təmin edin.
We are glad to accept your Letter of Credit and Third-party inspection, you will be never worry about the security of payment and the quality of products. Look forward to getting long term good cooperation with you in the future.
We can supply the international standard flat bottom rails as below, if you need it, please feel free to ask us:
