GOST 1R65 fishplate é um tipo de placa de peixe projetado e especificado de acordo com o GOST (Padrão estatal russo) 1Padrão R65. Fishplates são barras metálicas usadas para unir dois trilhos ferroviários na junta ferroviária. A placa de peixe GOST 1R65 é projetada especificamente para uso com perfis de trilho padrão russo com uma altura de 152 mm e uma largura de base de 160 milímetro.
As especificações detalhadas da placa de peixe GOST 1R65 são as seguintes::
Material: Aço, geralmente de grau 55#
Comprimento: 1000 milímetro
Largura: 45.5 milímetro
Altura: 130 milímetro
Hole diameter: 30 milímetro
Peso: Aproximadamente 29.5 Kg
Standard compliance: GOST 1R65-75
These fishplates are designed to be used with rails of the same standard and are manufactured with precise tolerances to ensure that they fit the rails correctly and provide a secure joint. They are commonly used in railroad construction and maintenance projects in Russia and other countries that use the Russian standard rail profiles.
The GOST 1R65 fishplate is a type of rail joint commonly used in Russia and other countries in the former Soviet Union that use the Russian rail standard. It may also be used in other countries that use Russian rail profiles or have adopted the GOST standard for rail joints. Portanto, it is primarily used in countries that have a history of using Russian rail standards or have adopted them for their rail infrastructure.
The GOST 1R65 fishplate is used for joining two rails together in a railway track. Here are the basic steps to use it:
- Make sure that the two rail ends to be joined are clean and free of any debris or rust.
- Place the two rails end to end, ensuring that they are properly aligned.
- Slide the GOST 1R65 fishplate over the two rail ends so that it is centered and covers the joint between the two rails.
- Insert the fish bolts (also known as fishplate bolts) through the bolt holes on the fishplate and the rail ends. Make sure that the bolts are tightened evenly and not excessively, which can cause damage to the fishplate or the rails.
- Check the joint for any gaps or misalignment between the rails. Se necessário, adjust the bolt tightness to ensure a tight and secure joint.
- Once the joint is properly installed and tightened, it should be inspected regularly to ensure that it is still in good condition and does not require any maintenance or repair.
Pad 1R – 65 is designed to be used as a transition pad for rails of a similar type, projetado para fixação de espeto e trilho de mola de juntas ferroviárias de tipos R-65.
For joining the R-65 and R-75 rails, forros de seis furos 1R-65 1000 mm de comprimento, e forros de quatro buracos 2R-65 800 mm longo são usados.
R-65 rails are jointed with each other using a 1R-65 lining or 2R-65 lining, which is attached to the inside and outside of the rail using M24x160 butt bolts.
Nós podemos fornecer os trilhos de fundo plano padrão internacional como abaixo, se você precisar, por favor, sinta-se livre para nos perguntar:
