Șina de oțel EN13674-1 50E2 să fie numită și șină 50EB-T, îl putem produce la comandă, MOQ este 500 Tone, duritate 260HB, lungimea poate fi 12 spre 25 Metri.
Desenul de mai jos:
EN13674-1 50E2 este un standard de clasificare a șinelor din oțel în Europa. It specifies the requirements for high-quality rail profiles, in terms of their chemical composition, proprietăți mecanice, and dimensional tolerances. Cel “50E2” refers to a specific profile type defined by the standard. These rails are commonly used in railway tracks for heavy-duty freight and passenger trains.
50E2 steel rail is a type of standard heavy steel rail used for railway tracks. Its specifications include:
– Greutatea șinei: 50.4 kg/m
– Înălțimea șinei: 180 milimetru
– Lățimea fundului: 150 milimetru
– Lățimea capului: 75 milimetru
– Grosimea web-ului: 16.5 milimetru
– Lungime: Obicei 12-25 Metri
50E2 steel rail is commonly used in high-speed railways and mainline tracks, and it meets the requirements of the European standard EN 13674-1.
Installing 50E2 steel rail requires specialized equipment and trained professionals. Here are the general steps for installation:
1. Clear the area and prepare the foundation: The area where the rail is to be installed must be cleared of any debris and leveled. The foundation must also be prepared according to the specifications of the rail manufacturer.
2. Pre-assemble the rail: Before laying the rail, the individual sections should be pre-assembled and joined together with rail joint bars and bolts.
3. Lay the rail: The pre-assembled rail sections are then laid out on the prepared foundation and secured using rail clips that are attached to the sleepers.
4. Adjust the alignment and gauge: The rail must be adjusted for proper alignment and gauge, which is the distance between the two rails on a track. This is done using specialized equipment such as a rail inspector’s gauge and a rail aligning device.
5. Secure the rail: Once the rail is properly aligned and in gauge, it should be fastened securely to the sleepers using rail clips, track bolts, and lock washers.
6. Conduct quality checks: After installation, quality checks such as ultrasonic rail testing and visual inspections should be conducted to ensure the rail is installed correctly and meets safety standards.
It is important to note that installing rail is a complex and dangerous task that should only be performed by trained professionals using appropriate safety measures and equipment.
Putem furniza toate tipurile de șine de oțel standard chinezesc, după cum urmează::
CALEA FERATĂ UȘOARĂ: 4kg / 6kg / 8kg / 9kg / 10kg / 12kg / 15kg / 18kg / 20kg / 22kg / 24kg / 28kg / 30kg șină de oțel pentru mine folosind.
CALEA FERATĂ GREA: 33kg/38kg/40kg/43kg/46kg/50kg/60kg/75kg pentru linia feroviară de marfă.
MACARALE FEROVIAR: QU70/QU80/QU100/QU120 pentru macara feroviar de funcționare.
