DIN536 A150/A120/A100/A75/A65/A55/A45 crane rail digunakan untuk crane run, derek di atas kepala bergerak, pelabuhan dan dermaga crane memindahkan rel, juga digunakan untuk transformer bergerak atau dermaga ground crane berjalan. Bahannya adalah 900A, kekerasan lebih dari HB260, Min 880 N/mm2, panjangnya adalah 12 Meter.
Rel derek standar ini memiliki dasar yang sangat lebar, sebagian besar negara maju tradisional suka menggunakan rel derek ini, tetapi biayanya lebih tinggi dari rel derek QU standar Cina (atau bernama GOST KP crane rail), please refer the specification as below:
| DIN 536 rel derek | |||||||
| Jenis | Diameter (Mm) | Berat satuan (kg/m) | Bahan | Panjangnya (m) | |||
| H.W (Mm) | H (Mm) | B.W (Mm) | W.T (Mm) | ||||
| A45 | 45 | 55 | 125 | 24 | 22.2 | 900Sebuah | 12 |
| A55 | 55 | 65 | 150 | 31 | 31.8 | 900Sebuah | 12 |
| A65 | 65 | 75 | 175 | 38 | 43.1 | 900Sebuah | 12 |
| A75 | 75 | 85 | 200 | 45 | 56.2 | 900Sebuah | 12 |
| A100 | 100 | 95 | 200 | 60 | 74.3 | 900Sebuah | 12 |
| A120 | 120 | 105 | 220 | 72 | 100 | 900Sebuah | 12 |
| A150 | 150 | 150 | 220 | 80 | 150.3 | 900Sebuah | 12 |
For these crane rails, some time we have some stock, if you need them, should confirm the type and quantity in advance. If we do not have stock, and the quantity is enough, we can deliver it within 40 Hari.
Q&Sebuah:
- How to install the crane rail?
Normally should use weldable rail clamp to weld on steel structure (plate), bottom should lay rubber pad to reduce the impact force. - How to choose single weldable rail clamp or double weldable rail clamp?
This should follow the design drawing, normally more than A75 should use double weldable rail clamp, less than it should use single weldable rail clamp. - How much rail clamp should be installed?
This also need follow the designing, if the crane is less than 275 Ton, the installation distance can be 600mm; If the weight of crane more than 275 Ton, the distance should be 500mm. - How to choose the rubber pad?
The width of rubber pad should same as the width of rail bottom, thickness should be 8mm, length should same as the length of rail 12000mm. The surface has groove, inside has iron sheet, the groove should be installed to upper.
Please refer the installation fasteners:
Merekomendasikan rel bawah datar berstandar internasional kami:
