Rel kren DIN536 A150/A120/A100/A75/A65/A55/A45 digunakan untuk kren, kren atas kepala bergerak, Pelabuhan dan Kereta Api Bergerak Kren Dermaga, Juga digunakan untuk transformer bergerak atau kren tanah jeti berjalan. Bahannya ialah 900A, kekerasan lebih daripada HB260, Min 880 N/mm2, Panjangnya ialah 12 Meter.
Rel kren standard ini mempunyai bahagian bawah yang sangat luas, Kebanyakan negara maju tradisional suka menggunakan rel kren ini, tetapi kosnya lebih tinggi daripada rel kren QU standard Cina (atau dinamakan rel kren KP GOST), please refer the specification as below:
| DIN 536 rel kren | |||||||
| Jenis | Diameter (Mm) | Berat unit (kg/m) | Bahan | Panjang (m) | |||
| H.W (Mm) | H (Mm) | B.W (Mm) | W.T (Mm) | ||||
| A45 | 45 | 55 | 125 | 24 | 22.2 | 900A | 12 |
| A55 | 55 | 65 | 150 | 31 | 31.8 | 900A | 12 |
| A65 | 65 | 75 | 175 | 38 | 43.1 | 900A | 12 |
| A75 | 75 | 85 | 200 | 45 | 56.2 | 900A | 12 |
| A100 | 100 | 95 | 200 | 60 | 74.3 | 900A | 12 |
| A120 | 120 | 105 | 220 | 72 | 100 | 900A | 12 |
| A150 | 150 | 150 | 220 | 80 | 150.3 | 900A | 12 |
For these crane rails, some time we have some stock, if you need them, should confirm the type and quantity in advance. If we do not have stock, and the quantity is enough, we can deliver it within 40 Hari.
Q&A:
- How to install the crane rail?
Normally should use weldable rail clamp to weld on steel structure (plate), bottom should lay rubber pad to reduce the impact force. - How to choose single weldable rail clamp or double weldable rail clamp?
This should follow the design drawing, normally more than A75 should use double weldable rail clamp, less than it should use single weldable rail clamp. - How much rail clamp should be installed?
This also need follow the designing, if the crane is less than 275 Tan, the installation distance can be 600mm; If the weight of crane more than 275 Tan, the distance should be 500mm. - How to choose the rubber pad?
The width of rubber pad should same as the width of rail bottom, thickness should be 8mm, length should same as the length of rail 12000mm. The surface has groove, inside has iron sheet, the groove should be installed to upper.
Please refer the installation fasteners:
Mengesyorkan rel bawah rata standard antarabangsa kami:
